Stability Chamber

Product Details:

1.Interior  body  made  of  Stainless  Steel  304  &  Exterior body made of MS (CRCA) Powder Coating.
Double Door: Inner Full Viewing glass door and Outer door insulated with lock  and  key  arrangement.  Inner and Outer are sealed by silicon sponge rubber gasket.
2.Double walled PUF insulation 70 MM modular panel.
3.Digital indication for Temperature / Humidity PID Controller.
4.Scanner single point Temperature and humidity sensors will be provided.
5.Compressor make “EMERSON” fitted with ISO-9001 certified ozone friendly hermetically  sealed  compressor  charged  with  CFC/HCFC  free  refrigerant, complete with air cooled condenser, fan motor, drier, capillary with complete
compressor accessories.
6.Boiler Tank is made of Stainless Steel.  Separate water tank and  boiler tank will be provided. The above set includes humidifier heater, float switch and
float valve.
7.By steam injection method.
8.Long lasting (S.S) tubular fin type heating elements stainless steel.
9.Main supply 230V AC, 50HZ Single Phase.
10.Forced air circulation for uniform temperature & humidity.
11.Perforated stainless steel (SS 304).
12.PU Castor wheel for easy move ability.
13.Interior illumination for working area.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

Features:

• Control system PID Control digital indication for temperatures and humidity.
• Sensors single temperature & Humidity sensors will be provided.
• Cooling system make “Emerson” with complete cooling accessories.
• S.S Boiler tank with accessories will be provided.
• IQ, OQ, PQ documents will be provided.
• Standard Operating Procedure (SOP) will be provided.
•  Under PQ we will perform the calibration for 1 Hour and validation will be performed for 4 Hours at one set value with loaded and empty conditions.
• Calibration and Validation certificates will be provided along with traceability certificates.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

Features:

• Wheels: PU castor wheels will be provided for easy move ability.
• Trays: Perforated stainless steel (SS 304).
• Illumination: Chamber light will be provided.
• Sensor: Scanner single point Temperature and humidity sensors will be provided
• Temperature Controller: Digital indication for Temperature / Humidity PID Controller.
• Boiler Tank: Complete set made of SS including accessories like float switch, float valve and Humidifier Heaters.
• Cooling System: Compressor make “EMERSON” fitted with ISO-9001 certified ozone friendly hermetically sealed compressor charged with CFC/HCFC free refrigerant, complete with air cooled condenser, fan motor, drier, capillary with complete compressor accessories.
• Heating System: Long lasting (S.S) tubular fin type heating elements stainless steel.
• Documents: IQ OQ PQ / SOP / Calibration / Validation

Optionals:

• Standby cooling Ssyem
• Standby humidity
• Common software
• Temperature scanner
• Door access system
• Printer interface

Product Details:

Features:

• Control system PID Control digital indication for temperatures and humidity.
• Sensors single temperature & Humidity sensors will be provided.
• Cooling system make “EMERSON” with complete cooling accessories.
• S.S Boiler tank with accessories will be provided.
• IQ, OQ, PQ documents will be provided.\
• Standard Operating Procedure (SOP) will be provided.
• Under PQ we will perform the calibration for 1 Hour and validation will be performed for 4 Hours at one set value with loaded and empty conditions.
• Calibration and Validation certificates will be provided along with traceability certificates.

 

Product Details:

Features:

• Wheels: PU castor wheels will be provided for easy move ability.
• Illumination: Chamber light will be provided.
• Sensor: Scanner single point Temperature and humidity sensors will be provided
• Temperature Controller: Digital indication for Temperature / Humidity PID Controller.
• Boiler Tank: Complete set made of SS including accessories like float switch, float valve and Humidifier Heaters.
• Heating System: Long lasting (S.S) tubular fin type heating elements stainless steel.
• Documents: IQ OQ PQ / SOP / Calibration / Validation

Optionals:

• Standby cooling system
• Standby humidity
• Common software
• Temperature scanner
• Door access system
• Printer interface

Product Details:

Features:

• Control system PID Control digital indication for temperatures and humidity.
• Sensors single temperature & Humidity sensors will be provided.
• Cooling system make “Emerson” with complete cooling accessories.
• S.S Boiler tank with accessories will be provided.
• IQ, OQ, PQ documents will be provided.\
• Weight 50kg.
• Standard Operating Procedure (SOP) will be provided.
• Under PQ we will perform the calibration for 1 Hour and validation will be performed for 4 Hours at one set value with loaded and empty conditions.
• Calibration and Validation certificates will be provided along with traceability certificates.

Product Details:

With the persistent support of our well-trained team of professionals, we are capable of manufacturing and supplying a vast gamut of superior quality range of Digital Humidity Chamber at cost-effective rates. The offered range is fabricated keeping in sync with the ongoing trends and demands of individual clients. After production process, the product undergoes stringent quality check tests to ensure the valuable client is offered 100 % immaculate range within stipulated time.

Feature:

• Microprocessor controller with data logging
• Electronic capacitance humidity sensor
• Standby Humidity System
• Printer interface for direct printing
• Inner full-length glass door and outer lockable metal door
• Alarms for temperature and humidity deviation. Low water level cut-off
• Safety devices for temperature overshoots / undershoots
• Safety devise for humidity overshoots
• IQ, OQ and PQ protocols, Calibration Certificate
• Ethernet interface for software connection.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

Double Door: Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and Outer are sealed by silicon sponge rubber gasket.
Double walled PUF insulation 70 MM modular panel.
Digital Indication for Temperature / Humidity PID Controller.
Scanner single point Temperature and Humidity sensors will be provided.
Compressor make “EMERSON” fitted with ISO-9001 certified ozone friendly hermetically sealed compressor charged with CFC/HCFC free refrigerant, complete with air cooled condenser, fan motor, drier, capillary with complete compressor accessories.
Long lasting (S.S) tubular fin type heating elements stainless steel.
Mains supply 230V AC, 50H_z Single phase.
PU castor wheels will be provided for easy move ability.
Forced air circulation for uniform temperature & humidity.
Perforated stainless steel (SS 304).
Complete set made of SS including accessories like float switch, float valve and Humidifier Heaters  etc.
Exposure of cool white florescent tube light for 1.2 mil Lux hours and UV-A light for 200 watt hours per square meter on the test sample
Cool white, near ultraviolet, full spectrum, and dual source cool white luv banks designed to meet options 1 and 2 of current ICH/FDA guideline.
After completion of cycle.
Shelf mounted light tubes providing direct uninterrupted light to test sample interior illumination.
UV Florescent Light. UV Tube light.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

Features:

• Control system PID Control digital indication for Temperatures and Humidity.
• Safety alarm devices for Temperature and Humidity Overshoot. 
• Sensors single Scanner Temperature & Humidity sensors will be provided.
• Cooling system make “EMERSON” with complete cooling accessories. 
• S.S Boiler tank with accessories will be provided. Trays perforated Stainless Steel (SS 304) trays will be provided.
• Standard Operating Procedure (SOP) will be provided. IQ, OQ, PQ documents will be provided. 
• Under PQ we will perform the Calibration for 1 Hour and Validation will be performed for 24 Hours at one set value with empty conditions.
• Calibration and Validation certificates will be provided along with traceability certificates.
• Standby Cooling System
• Standby Boiler Tank
• Printer Interface
• Common Software PID
• Tenperature & Humidity Sensor
• UV Meter 
• LUX Meter

Product Details:

Features:

• Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and Outer are sealed by silicon sponge rubber gasket.
• Lighting system: Exposure of cool white fluorescent tube light for 1.2 mil Lux hours and UV-A light for 200 watt hours per square meter on the test sample. Cool white, near ultraviolet, full spectrum, and dual source cool white luv banks designed to meet options 1 and 2 of current ICH/FDA guideline. Combined light exposure or individual light exposure with automatic light cut off system after exposure is achieved.Shelf mounted light tubes providing direct uninterrupted light to test sample interior illumination. UV florescent Light. UV Tube light.
• UV & Lux Meter: For measuring the intensity of UV lights and LUX meter is used for measuring the intensity of LUX.
• IQ,OQ,PQ,SOP Calibration & Validation.

Product Details:

      Interior SS 304/316 & Exterior SS 304 or Mild Steel (MS Powder Coated)

      Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and outer are sealed by silicon sponge rubber gasket.

      Double walled PUF insulation 70 MM modular panel.

      PID based controller & PLC based controller.

      High quality temperature and humidity sensors.

      Compressor make “EMERSON” hermetically sealed compressor charged with CFC free refrigerant, complete with air cooled condenser.

      Boiler Tank is made of Stainless Steel.

      By steam injection method.

      Long lasting (S.S) tubular fin type heating elements SS.

      Mains supply 230V AC, 50Hz Single phase.

      Forced air circulation for uniform temperature & humidity.

      Perforated/Mesh type stainless steel (SS 304).

      PU Castor wheel for easy move ability.

      Interior illumination for working area.

      Safety devices: Low temperature cut-off settable thermostats

      Audio/Visual alarms for deviations.

      IQ, OQ, PQ & SOP Along with Traceability.

Product Details:

      Interior SS 304/316 & Exterior SS 304 or Mild Steel (MS Powder Coated)

      Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and outer are sealed by silicon sponge rubber gasket.

      Double walled PUF insulation 50 MM modular panel.

      PID based controller & PLC based controller.

      High quality temperature and humidity sensors.

      Compressor make “EMERSON” hermetically sealed compressor charged with CFC free refrigerant, complete with air cooled condenser.

      Boiler Tank is made of Stainless Steel.

      By steam injection method.

      Long lasting (S.S) tubular fin type heating elements SS.

      Mains supply 230V AC, 50Hz Single phase.

      Forced air circulation for uniform temperature & humidity.

      Perforated/Mesh type stainless steel (SS 304).

      Interior illumination for working area.

      Weight : Approx. 50 KG

      Safety devices: High temperature cut-off settable thermostats

      Audio/Visual alarms for water low level.

      IQ, OQ, PQ & SOP Along with Traceability.