BOD Incubator

Product Details:

Features:

• Control system by PLC 4.3” HMI Display with touch screen will be provided.
• Safety Relay for Temperature Capillary Thermostat for Temperature overshoot.
• Imaginary cut off for compressor in case of low temperature (Undershoot).
• PT – 100 Sensor single scanner temperature sensors with transmitter will be provided.
• Cooling system Make “EMERSON” with complete cooling accessories.
• Mesh trays stainless steel (SS 304) will be provided.
• IQ, OQ, PQ documents will be provided.
• Standard Operating Procedure (SOP) will be provided.
• Under PQ we will perform the calibration for 1 Hour and validation will be performed for 24 Hours at one set value with loaded conditions.
• Calibration and Validation certificates will be provided along with traceability certificates
• Optional: 01. Temperature PT 100 Sensor With Transmitter 
• Optional: 02. Standby Cooling System
• Optional: 03. Common Software PLC -21CFR

After Sale Services we are also providing Services like:-

• Annual Maintenance Contract (Both Comprehensive as well as Non Comprehensive).
• Annual Calibration and Validation.

 

Other Services like:-

• Up gradation of any “MAKE” Chambers.
• Dismantling and Reinstallation of the Chambers.
• Spare Parts Support for any “Make” Chambers.
• IQ, OQ, PQ Documents.
• Calibration and Validation

Product Details:

1.Interior & Exterior body made of Stainless Steel 304.Double Door: Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and Outer are sealed by silicon sponge rubber gasket.
2.Double walled PUF insulation 70 MM modular panel.
3.Fully controlled by Programmable Logic Controller (PLC) and communication on Ethernet.
4.HMI-4.3’’ touch screen display.
5.PT – 100 Temperature sensor with transmitter will be provided.
6.Compressor make “EMERSON” fitted with ISO-9001 certified ozone friendly hermetically sealed compressor charged with CFC/HCFC free refrigerant, complete with air cooled condenser, fan motor, drier, capillary with complete compressor accessories.
7.Mains supply 230V AC, 50H_z Single phase.
8.Forced air circulation for uniform temperature.
9.Mesh type trays made of stainless steel (SS 304).
10.PU castor wheels will be provided for easy movement. 
11.Interior Chamber light will be provided.  

Product Details:

Double Door: Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and Outer are sealed by silicon sponge rubber gasket.
Double walled PUF insulation 70 MM modular panel
Fully controlled by Programmable Logic Controller (PLC) and communication on Ethernet
4.3’’ touch screen display.
PT – 100 Temperature sensor with transmitter will be provided.
Compressor make “EMERSON” fitted with ISO-9001 certified ozone friendly hermetically sealed compressor charged with CFC/HCFC free refrigerant, complete with air cooled condenser, fan motor, drier, capillary with complete compressor accessories.
Mains supply 230V AC, 50H_z Single phase.
Forced air circulation for uniform temperature.
Mesh type trays made of stainless steel (SS 304).
PU castor wheels will be provided for easy movement. 
Interior Chamber light will be provided. 

OPTIONAL: 
1.Temperature PT 100 Sensor with Transmitter.
2.Standby Cooling System.
3.Common Software (SDMS Version 1.0 USFDA 21 CFR PART 11 COMPLIES 

Product Details:

      Interior SS 304/316 & Exterior SS 304 or Mild Steel (MS Powder Coated)

      Inner Full Viewing glass door and Outer door insulated with lock and key arrangement. Inner and outer are sealed by silicon sponge rubber gasket.

      Double walled PUF insulation 70 MM modular panel.

      PID based controller & PLC based controller.

      High quality temperature and humidity sensors.

      Compressor make “EMERSON” hermetically sealed compressor charged with CFC free refrigerant, complete with air cooled condenser.

      Boiler Tank is made of Stainless Steel.

      By steam injection method.

      Long lasting (S.S) tubular fin type heating elements SS.

      Mains supply 230V AC, 50Hz Single phase.

      Forced air circulation for uniform temperature & humidity.

      Perforated/Mesh type stainless steel (SS 304).

      Interior illumination for working area.

      Safety devices: Low temperature cut-off settable thermostats

      Audio/Visual alarms for deviations.

      IQ, OQ, PQ & SOP Along with Traceability.

Product Details:

Owing to the advanced technology, we are capable of offering a comprehensive range of superb quality Bod Temperature Incubator within set time-frame. The range is offered at cost-effective rates. We fabricate the product in different customized range to fulfill the specific requirements of our clients. Our clients appreciate the offered range of BOD Incubator for its 100 % reliability and superb performance.

Features:

• CFC Free Refrigeration system
• Micro controller based controller with data logging.
• Digital display improved visibility, with 0.1 deg C resolution for accurate measurement.
• Interior made of stainless steel & exterior made of either powder coated steel or stainless steel trays.
• Wire mesh stainless steel trays.
• Inner full-length glass door & outer lockable metal door.
• Alarms for temperature deviation
• Safety devised for temperature overshoots / undershoots.
• Documentation Support, IQ OQ and PQ protocols.
• Calibration certificate.
• Printer interfaces for direct printing.
• Data Acquisition software smart -DAQ.
• Air circulation: Forced Air Circulation for uniform temperature.
• Heating: Tubular fin type heating element.
• Cooling: Hermetically sealed compressor, evaporation coil and fan cooled condenser.
• Indication: Digital indication for actual & set temperature with PT100 sensor.
• Trays: Stainless steel pipe trays.
• Optional: Chamber illumination with 4 fluorescent tubes of 2 ft. each with programmable 24 hrs timer for Day & Night effect can be provided.

Product Details:

Features:

• Safety Relay for Temperature overshoot.
• Cooling system Make “EMERSON” with complete cooling accessories.
• IQ, OQ, PQ documents will be provided.
• Standard Operating Procedure (SOP) will be provided.
• Under PQ we will perform the calibration for 1 Hour and validation will be performed for 4 Hours at one set value with loaded condition.
• Calibration and Validation certificates will be provided along with traceability certificates.
• Optional: 01. Standby Cooling System.
• Optional: 02. Common Software PID
• Optional: 03. Printer Interface

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

With the constant usage of premium quality basic materials and latest techniques of production, we are supplying the wide assortment of Bacteriological Incubator within the pre-defined time. The range is nation-wide demanded its reliability, premium quality and longer service life. After production, the range is tested on several stringent tests to check its perfect quality. For the optimum benefit of our clients, we are offering the range at industry leading rates.

Features:

• Digital display microprocessor based temperature controller
• Interior made of stainless steel and exterior made of either Powder coated steel or stainless steel
• Mesh type trays
• Inner full length glass door
• Alarms for temperature deviation
• Safety devices for temperature overshoots.
• IQ, OQ and PQ protocols
• Calibration certificate

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.

Product Details:

We are manufacturer of Low And High Temperature Bath, Laboratory And Pharmaceutical Oven, Humidity Chamber, Hospital Autoclave, BOD Incubator, Vertical Sterilizera and Walk In Chamber etc. Our significant expansions in product varieties have marked us as a highly reliable firm of the market.